MDHL Jump Starter & Tyre Inflator DDQ-1022
The MDHL Jump Starter & Tyre Inflator (Model: DDQ-1022) is a compact, 4-in-1 emergency roadside tool. It is designed to be a "glovebox essential," combining a high-discharge battery for vehicle recovery with a digital air pump for tire maintenance.
Here are the key features and specifications for this model:
Core Functionality
-
Emergency Jump Starter: Capable of jump-starting 12V vehicles (most standard cars, SUVs, and motorcycles) even when the battery is completely dead.
-
Smart Tire Inflator: Features a digital display where you can preset your desired pressure (PSI/Bar). The pump will automatically shut off once the target pressure is reached to prevent over-inflation.
-
High-Capacity Power Bank: Equipped with USB output ports to charge smartphones, tablets, and other electronic devices during power outages or trips.
-
Emergency LED Lighting: Includes a built-in high-intensity flashlight with multiple modes, including Steady, SOS, and Strobe for nighttime breakdowns.
Technical Specifications
| Feature | Details |
| Model | DDQ-1022 |
| Battery Capacity | 10,000mAh |
| Operating Voltage | 14.8V |
| Max Inflation Pressure | 150 PSI |
| Charging Input | USB Type-C |
| Output Ports | USB-A (for devices), Jump Start Port (for clamps) |
| Display | Digital LCD (shows battery level and pressure) |
Key Benefits
-
Compact Portability: Unlike traditional bulky "jump packs," this unit is roughly the size of a large smartphone or a small brick, making it easy to store in a trunk or center console.
-
Multi-Vehicle Support: Comes with various nozzle adapters, making it suitable not just for car tires, but also for motorcycles, bicycles, and sports balls.
-
Safety Protections: Typically includes smart clamps with protection against short-circuits, overheating, over-voltage, and reverse polarity (spark-proof).
-
All-Weather Performance: Designed to operate in a wide temperature range, ensuring the jump starter works in cold winter conditions.
How to Use for Jump Starting
-
Connect Clamps: Plug the smart jumper cables into the DDQ-1022 unit.
-
Attach to Battery: Connect the Red clamp to the positive (+) terminal and the Black clamp to the negative (-) terminal.
-
Start Engine: Turn the car key or press the start button.
-
Disconnect: Once the car starts, remove the clamps from the battery within 30 seconds.