Electric Depilatory Heaater 8065A

The Professional Roll-On Electric Depilatory Wax Heater (Model 8065A) is a portable, salon-grade hair removal device designed for clean, convenient, and efficient waxing at home. Unlike traditional open-pot wax warmers that require messy spatulas, this model uses a plug-and-play cartridge layout that applies smooth, even layers of wax directly via a rolling applicator head.

Technical Specifications

• Model: 8065A

• Type: Handheld Roll-On Depilatory Wax Cartridge Heater

• Power Consumption: 40W (Energy-efficient quick-heating circuit)

• Voltage Input: AC 220-240V ~ 50/60Hz (Standard EU/UK plug configuration)

• Chassis Material: Shock-resistant, insulated ABS Plastic

• Dimensions: Approximately $75 \times 50 \times 200\text{ mm}$ (Compact and highly ergonomic)

• Heating Mechanism: Dual-sided inner metal heating plates for uniform thermal transfer

• Compatibility: Fits all universal 100ml roll-on depilatory wax cartridges

Key Features Explained

• Direct Roll-On Application: The 8065A eliminates the need for messy dipping sticks or wooden spatulas. By sliding a 100ml wax cartridge inside, the roller head glides smoothly over your skin, creating a perfectly thin, uniform wax coating with minimal effort.

• Dual-Plate PTC Uniform Heating: Equipped with two internal metal heating sheets that run down the side walls of the cartridge chamber. This ensures that heat distribution is perfectly even, melting the core of the wax without leaving hard, cold lumps.

• Integrated Transparent Inspection Slot: A clear viewing window on the side of the plastic chassis allows you to check the melting consistency of your wax cartridge and monitor the remaining volume mid-session.

• High-Efficiency 15-Minute Melting Window: Pumping 40 Watts of constant, automatically regulated heat, it softens a dense, standard wax cartridge into a warm, usable liquid state in about 15 to 20 minutes.

• Hygiene & Safety Protection: Features a tight-fitting protective dust lid cover that blocks airborne debris or lint from falling onto the rolling applicator between treatments, keeping the wax sanitary for future use.

Step-by-Step Operation Guide

Important Safety Note: Always perform a quick heat patch test on a tiny sliver of your inner wrist before smoothing the wax over large surface areas to avoid thermal skin burns.

1. Insert & Heat: Slide a standard 100ml wax refill cartridge into the 8065A slot. Pop on the dust cover and plug the power cord directly into an electrical socket.

2. Wait for Melt: Let the unit heat undisturbed for 15 to 20 minutes. Once fluid, unplug the cord (or leave it docked if cordless rolling is preferred).

3. Prime the Roller: To ensure smooth glide, roll the applicator head across a spare strip of wax paper once or twice until the wax flows evenly.

4. Apply to Skin: Hold the device at a 45-degree angle and pull it across your clean, dry skin in the exact direction of your hair growth.

5. Strip & Remove: Place a non-woven waxing paper strip firmly over the layer of wax. Rub it down securely, tauten your skin with one hand, and quickly pull the strip back against the direction of hair growth in one swift motion.

What's In the Box

1. 8065A Electric Depilatory Wax Heater Handset

2. Detachable Main Power Cord (AC Cable)

3. Semi-Transparent Dust Protection Lid

4. User Instruction Manual